* Kaikki tuotteen kuvat ovat valaisevia.

Mr. Bulletfeeder Pro Conversion Kit

You can use your Mr.Bulletfeeder PRO for more than just one caliber, switching over quickly and easily with the help of the readily-available conversion kits. These kits include all the parts needed to switch your bullet feeder from one caliber to the next in a matter of minutes.


349,53 €


A Mr.Bulletfeeder PRO pistol conversion kit includes a PRO collator plate, a full PRO dropper assembly and an expanding powder funnel. The Rifle conversion kit includes the PRO collator plate, a full PRO dropper assembly, and a small output spring assembly. No powder funnel is included with the rifle calibers, as those cannot be used due to the small size of the case mouth.

Please note: All pistol calibers use the same output tube, lead spring and spring adaptor cap. So this assembly is not included in the conversion kit –as you will not need a second one when changing pistol calibers.

The rifle calibers too share the same output assembly, and so when converting from 223 to 308, the same output assembly is used.

However – if you intend to buy a conversion kit to convert a rifle unit to a pistol caliber, you must purchase the output assembly required, in addition to the conversion kit

DILLON XL750 Note:
The Dillon XL750 Powder Measure is angled such that the powder bar must extend directly over station #4 in the toolhead, and it cannot be repositioned. This Is not an issue if you have a short die in that station. However, if you wish to run a powder check in station #3, and a bullet dropper in station #4, as many do, this creates a serious problem. As a solution to this issue we are pleased to offer Extra-Short Dillon Powder Bar.
Saatat pitää myös